1.Specification
1)Material:GR1,GR2,GR3,GR5,GR7,G12 and other materials.
2)Diameter: DN15-DN1200, 1-1/2~48",Sch5s~Sch80
3)Wall thickness: SCH5-SCH160
4)Type: dished end, casing
5)Technical: seamless
6)Surface treatment:sand Blasting
7)Inspection: Internal Control, The third party(eg.SGS).
8)Standard: ASTM B363, ASME16.9, SH3408, SH3409, HG/T21635, DL/T695, SY/T0510, DIN2617
2.Brief introduction
1)Casing cap, also known as tube connector, a fitting welded to or mounted on external threads at the end of a pipe. Used to close the pipeline, the function is the same as pipe blocking.
2) Type: THE CAP IS SIMILAR TO THE BLIND, EXCEPT THAT THE BLIND IS REMOVABLE AND THE WELDED CAP IS NOT REMOVABLE. The design of the pipe cap includes a convex pipe cap, a cone shell, a reducer section, a flat cap and a tightening mouth. Convex tube caps include: hemispherical tube caps, oval tube caps, dish-shaped tube caps and ball-shaped tube caps. From the point of view of force, the convex tube cap from the hemispherical tube cap is gradually not good, but from the point of view of manufacturing difficulty, it is gradually easy to manufacture.
3.Usages
Pipe lines connector,water, beverage, beer, food, petrochemical, machinery, medical equipment, chemical fertilizer, shipbuilding, waterproof treatment, pipeline, etc.