1.Product description | |
Product name | titanium tee |
Material | Titanium,nickel or your demands |
Standard | HG/T 3651, HG/T 20592, ASTM B363, ASTM B861, ASTM B16.9, ASTM B16.11, MSS SP-43, MSS SP-97 |
Thickness | 0.12mm--3mm or customized |
Width | 600mm--2000mm or customized |
Surface Structure | 2B,BA,HL,BK,NO.1,NO.4,8K etc |
Country of origin | China |
Delivery time | 10-15 days after your deposit, or according the quantity |
Customized | Acceptable |
Surface treatment | pickling, steel shot sand, quartz sand, etc |
Detection method | coloring, flaw detection. |
2.Introduction
Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. They are mainly used to change the direction of the fluid, used in the main pipe to branch pipe. They could be classified by diameter of pipes.
Classification is below.
1)Divided by pipe diameter size
A.The end of the equal diameter tee is the same size;
B.The pipe size of the reduced tee is the same, while the pipe size of the branch is smaller than that of the main pipe.
2)Divided by process
A. Hydraulic expansion
The hydraulic expansion of tee is a forming process which compensates the axial expansion of the branch pipe by the metal material.The process is to use a special hydraulic press to inject liquid into the tube billet with the same diameter as the three-way, and then squeeze the tube billet through the synchronous middle movement of the two horizontal side cylinders of the hydraulic press. The volume of the tube billet becomes smaller after extrusion, and the liquid in the tube billet increases with the volume of the tube billet. When the pressure required by the three-way branch pipe expands, under the dual action of liquid pressure in the side cylinder and the billet, the metal material flows along the inner cavity of the mold and expands out the branch pipe.
B. Hot pressing forming
Hot pressing is to flatten the larger tube billet to the final size of tee.
Cold drawing tee
3)Divided by material
Titanium,nickel,Carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chromium leaching, PVC, etc.
4)Divided by manufacturing standards
National standard, electric standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard, etc., the details are as follows:
GB/T12459-2005,GB/T13401-2005,ASME B16.9,SH3408,SH3409-96,SH3410-96,HG/T21635,DL/T 695,SY/T 0510,DIN 2615. GB/T12459-2005,GB/T13401-2005,ASME B16.9,SH3408,SH3409-96,SH3410-96,HG/T21635,DL/T 695,SY/T 0510,DIN 2615。